Search:

Nevermind, they appear to match dimensions of LD20 discs.

Going through my car and have one rotor that measures slightly tweaked, causing some drag.

PFC Rotors 255.10.0042.03 and .04, Pegasus says no longer made.

Any alternative rotors compatible with...

About 15 years ago, I flew on a trip with my dive gear. I had two small pony bottles (3L) with the valves completely removed.

TSA would not let me check the cylinders and I had to carry them on...

If I had extra inputs, I'd be looking at:

- shock travel
- steering angle
- radiator inlet and outlet temps
- oil cooler inlet and outlet
- fuel pump discharge pressure if a remote pump
-...

Mark and I have chatted quite a bit on these. Seems he does primo harness work too. You're not the friend he mentioned that has a K67 2020+ motor are you?

Great info, thanks for sharing. Any development issues on the BMW motor in general? Dry sump, etc?

I have a '16 motor on an engine stand and have been working on the stock ECU to adapt it for a...

Jerry, what *was* Alex running in his JDR? Trap speeds were impressive and commentators during qualifications said it was a Ford, maybe a Coyote engine....some people's kids...

I had heard it was...

I've been looking at this a bit in the GCR and believe all of the following are allowable (assuming we are talking about f1000 engines in FA):
- any ECU
- any intake modification
- bore and stroke...

One of the things I've never fully understood was the pushback on the open ECUs. Granted, a stock bike ECU is cheaper, but a decent aftermarket ECU isn't much more than a set of tires. Sure throwing...

Ah, thanks, didn't know you could see the entry lists. Smaller field than last year, let's hope no one tries to be Alex's hat again.

Any F1000s going this year?

Is there anywhere to see results or follow along for the season? Doesn't look like much on the site for updates or on the FB page. I'm trying to live vicariously through you guys until next year.

I got all excited seeing a Bimmer wet sump mentioned and was going to ask where, then scrolled down and saw your name, lol. Hey Mark.

Archaic thread bump, but a timely post for 2022.

My god this makes me itch in a funny place.

Not much to update, busy week so far, but received a 2013 DME. Hoping to get it opened up early in the week and get a read out of the flash memory.

I did find a few stock files around the...

I'll keep posting here with stuff as I collect info. If nothing else, may prove useful down the road for someone else should I abandon ship.

Wiring diagrams for the DME.

79903
79904
79906...

Ok, I lied. I'm pretty obsessed on this at the moment.

So the ECU I bought is from a 2013. Looking at available part numbers for them, there is only one listed. This means that the options for...

Thanks again.

Well, I just bit the bullet and bought a 2013 ECU on ebay with no key. I'll get it connected, read out the flash memory and see what's there.

Is throttle by wire prohibitive due...

Thanks for the input Gary.

I think it would be fairly straightforward to make the DME run any of the engines of any year range, given the similarity of the parts. At least that was the purpose of...

I totally lost it as well (and haven't heard anyone outside of submarines use that term before).

Not entirely sure on the updates to the engine. From the core perspective, the crank is shared up...

I'd seen that one, but it uses a Haltech ECU.

I was under the impression FB still required the stock OEM ECU with only reflashing allowed.

Greetings all,

Long time lurker / occasional poster. Years ago (before buying an old house) I was looking into getting into FB and the BMW S1000RR motor fascinated me. A lot of time has gone by...

I'm reading it on an iPhone, but that's what it looks like to me too, F500...

I have to say....this is very exciting.

I just discovered SCCA formula racing a few months ago, had no idea it existed prior to that.

I use to race 600cc supersport in CCS southeast region,...

Digging up an old post, but if anyone still has this, please let me know. My first attempts with SolidWorks 2010...