I know this is a long shot, but I am looking for 8 Revolution sleeved lug nuts. They need to be 3/8" UNF thread, ~0.622 shank diameter and 1.375" long shank length. Anybody? Thanks.
Printable View
I know this is a long shot, but I am looking for 8 Revolution sleeved lug nuts. They need to be 3/8" UNF thread, ~0.622 shank diameter and 1.375" long shank length. Anybody? Thanks.
Just a guess but maybe Neil Porter
Dan
You can have them made easily enough, they have come more difficult to find over the years. I assume you don't need the 'open' end for long studs?
Let me look at home and see if I happen to have some. Are these for the Lotus or the Chinook? Hopefully we see you at Pacific Raceway this weekend.
For the Lotus. The stud protrusion is a little over an inch, but the wheel hub is approximately 1.375" thick, so I need them to be that long to fully engage the wheel stud. Don't care if they are open or closed ended.
Thanks,
Dan
I have 4 Revolution new never used open end wheel nuts with washers that fit your description that you can have for the price of shipping.
Send me your shipping info if interested.
Tom
Mini Mania in the US carries them in steel and stainless
Revolution in England carries them
Robby
Just received a set of 16 open end sleeve nuts and washers from Revolution, your specs except 7/16" instead of 3/8". They cost less than $50, are beautifully made and actually fit the wheels. After a dismal experience with Grayston (shanks too large, not concentric), my faith in the Brits is restored. Highly recommended.
Bob,
Did you order those lug nuts from the UK or stateside? Contact person?
Thanks!
I called Warren at Revolution directly to buy wheels and wheel nuts/washers. He was great to work with.
Warren K McKiernan
Revolution Wheels International Ltd
2 Eco Court
Latimer Way
Sherwood Energy Village
Ollerton
Nottinghamshire
NG22 9QW. UK
TEL +44 (0) 1623 860000
FAX +44 (0) 1623 860165
MOB +44 (0) 7702 845264
EMAIL info@rwil.org.uk
Perfect, thank you!