wanted: swirl pot for late model VD oil tank

looking for a used swirl pot for a late model VD oil tank. at this point structural integrity is more important than appearance as it's almost a certainty at least one additional input port will need to be added (ie: -12 and two -10's in (or three -10's) AND a -10 out). my oil pump includes an oil/air separator meaning one hose for oil, one hose for air, and one hose for the vent line from the valve cover.

Art
artesmith@earthlink.net

Art,

I replaced mine with the alum one from Primus recently.

IIR it is standard.
Vent in from the valve cover.
-10 in from the pump
Vent out the back to the overflow.
I'll dig it out and get you a picture.