Printable View
If some kind soul with a rocker-era (say, 1983) RT4 could send me the distance between the fore and aft rod-end centers of the lower rear a-arm (i.e. at the gearbox end), that would be much appreciated.
Just eyeballing to the nearest 1/16th with a tape measure is close enough. I'm trying to figure out why my car doesn't seem to match RT4 a-arms Mr. Warner graciously supplied for trial. It might be a mix and match issue, or some demon tweek.
PM is fine.
timos
can't help you with the measurement but wanted to know if you could help me
I'm looking for a later model RT4 in very good condition, know anyone with one in the garage their not using ??
I have an 82 RT5. Would it's measurements be of help?
Can you define "later model?" What aspects of the "later model" are the deciding factors?Quote:
Originally Posted by nomis
Could be! I'd be interested for reference purposes. Thank you.Quote:
Originally Posted by Greg S.
I measured 12.5" bolt to bolt at the sandwich plate, which agrees with another RT4 owner's two cars. :confused:
tim